rough-in change on toilet
Posted by Dan on July 08, 19100 at 14:45:58:
I have an old wall-mounted toilet tank that has a 2" line that runs to the back of the bowl section. This thing uses about 6+/- gallons per flush. It has a 15" rough-in (distance from wall to bolt holes). I want to put a 1.6 gallon (per flush) toilet in but most have a 12" rough-in. Other than the back of the tank being 3" from the wall are there any other ramifications that I need to be aware of if I go to the new system??


Replies to this post