Re: GERBER WITH FLUSHMATE ADJUSTMENTS
Posted by Terry Love on May 27, 19100 at 12:30:09:
In response to Re: GERBER WITH FLUSHMATE ADJUSTMENTS

: the gap between the trip lever assembly unit & the actuator is a little over 1/2 inch clearance - How do I lower the trip lever to 1/8 inch clearance ? thank you in advance for your reply!
: mart

Mart,
There should be a screw that you can loosen. The actuator will unthread to a higher position. Retighten screw.
Terry



Replies to this post
There are none.