Chefwong
Member
What's the secret sauce on getting good clean cuts in Pex.
I may try my tubing cutter with the blade I use to cut PVC with.....
Bought this cutter and I'm not getting good clean straight cuts.
I've tried cutting it on one side....flip the tool 180 so it chops on the opposite side of the tube, etc.
It's just slight tweaked. All cuts are slightly angled.
I'm cutting 3/4" Pex or HePex to be exact
http://www.pexsupply.com/Wirsbo-Uponor-E6081128-Tube-Cutter-plastic-up-to-1-PEX-2165000-p
Is the tubing cutter I got a POS and there is a better one ?
I may try my tubing cutter with the blade I use to cut PVC with.....
Bought this cutter and I'm not getting good clean straight cuts.
I've tried cutting it on one side....flip the tool 180 so it chops on the opposite side of the tube, etc.
It's just slight tweaked. All cuts are slightly angled.
I'm cutting 3/4" Pex or HePex to be exact
http://www.pexsupply.com/Wirsbo-Uponor-E6081128-Tube-Cutter-plastic-up-to-1-PEX-2165000-p
Is the tubing cutter I got a POS and there is a better one ?