Which TOTO Will Fit

Discussion in 'Toilet Forum discussions' started by tony f., Sep 6, 2011.

  1. tony f.

    tony f. New Member

    Messages:
    3
    Location:
    nj
    Hi,

    Have a 14" rough in and have seen the posts as to which Toto's will fit, my problem is the connection valve sits 2" above floor and is lined up with the left side of the flange on the wall. So was looking at the Carlyle, but looks like I won't have the clearance, any suggestions.
  2. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,334
    Location:
    Yakima WA
    The Carlyle with the 14" Unifit is an excellent choice. You're right, the shut off valve is in a bad location, and would likely be a problem with many toilets. I would look at relocating the shut off valve to a better location. Unless you have tiled walls, this is a very easy thing to do. Tile would make it more difficult but not impossible.

    [​IMG]
    Last edited by a moderator: Dec 24, 2011
  3. tony f.

    tony f. New Member

    Messages:
    3
    Location:
    nj
    thx Gary, thats what I figured, even though I just had a plumber in to move it from a different wall. I should have said something then, just really didn't realize it.
    Last edited by a moderator: Dec 24, 2011
Similar Threads: TOTO
Forum Title Date
Toilet Forum discussions leaking toto unifit Yesterday at 8:23 AM
Toilet Forum discussions one piece vs two piece Toto Saturday at 10:24 PM
Toilet Forum discussions Broke off a flush valve hook - Toto Vespin Aug 20, 2014
Toilet Forum discussions Toto toilet spurts water 7-11 times from water pipe after flushing Aug 16, 2014
Toilet Forum discussions Toto flush lever getting stuck. Aug 12, 2014

Share This Page