Nonstopwork
New Member
- Messages
- 3
- Reaction score
- 0
- Points
- 0
Hi, I have been reading alot of "what size is best" but I have been getting mix reviews. I am re-doing all my plumbing, since I have the old PB, and it started leaking from the joints.
First, my house has basement(where my feed and HW Tank is) and 2 floors. I have 3 full bathroom, and 1 powder room, 2 kitchen, and 1 laundry.
My main water supply is 3/4" to the house and I am getting 75-80PSI. I am planning to run the CW with 3/4" and run 1/2" T at each fixtures. For HW I am planning to run 3/4" most of the way then run 1/2" T since my HW Tank intake is 1/2"... and it leaves the tank 1/2" also. So rest of the HW line will be 1/2" through out the house... (or... should I run 3/4" just like CW???)
I am planning to upgrade my water tank since 40L is not enough, and maybe I could get a tank with 3/4" feed and out.
Thanks in advance
First, my house has basement(where my feed and HW Tank is) and 2 floors. I have 3 full bathroom, and 1 powder room, 2 kitchen, and 1 laundry.
My main water supply is 3/4" to the house and I am getting 75-80PSI. I am planning to run the CW with 3/4" and run 1/2" T at each fixtures. For HW I am planning to run 3/4" most of the way then run 1/2" T since my HW Tank intake is 1/2"... and it leaves the tank 1/2" also. So rest of the HW line will be 1/2" through out the house... (or... should I run 3/4" just like CW???)
I am planning to upgrade my water tank since 40L is not enough, and maybe I could get a tank with 3/4" feed and out.
Thanks in advance
Last edited: