Water supply question

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by RKD, Mar 3, 2009.

  1. RKD

    RKD New Member

    Messages:
    11
    I have a Delta single handle kitchen faucet (with a new repair kit installed). Here's what the problem is, the cold has great pressure, the hot starts out ok but tapers off, seems as if the water flow is restricted. As the hot side flows I can hear a slight single click when the water flow reduces. No kinks in the supply line, could the shut off valve in the supply line be bad? Thanks.
  2. kingsotall

    kingsotall Plunger/TurdPuncher

    What brand of supply line are you using¿ Please don't say "flood stop."
  3. RKD

    RKD New Member

    Messages:
    11
    The suppy lines are the flexible braided steel.
  4. kingsotall

    kingsotall Plunger/TurdPuncher

    Not this one though, right:

    [​IMG]
    Last edited: Mar 3, 2009
  5. RKD

    RKD New Member

    Messages:
    11
    No not that kind.
Similar Threads: Water supply
Forum Title Date
Plumbing Forum, Professional & DIY Advice Regulating outside hose/water supply pressure Dec 8, 2014
Plumbing Forum, Professional & DIY Advice Removing the water supply line on a kitchen sink Nov 16, 2014
Plumbing Forum, Professional & DIY Advice Home water supply advice Oct 27, 2014
Plumbing Forum, Professional & DIY Advice Exterior vs interior wall cavities for water supply - just curious Sep 25, 2014
Plumbing Forum, Professional & DIY Advice water hammer on supply side of pressure tank Sep 20, 2014

Share This Page