Washing Machine Rough-In.

Discussion in 'Plumbing Forum, Professional & DIY Advice, Tips & ' started by ygdron, May 15, 2005.

  1. ygdron

    ygdron New Member

    Messages:
    6
    The outlet in the Oakley Washing Machine box and the inlet to my P-Trap do not quite line up, and are off by about 5". Is it allowable to put a jog in the downtube using two 45 degree fittings so that they line up? Or does it have to be straight.

    Thanks for your help.
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,304
    Location:
    Cave Creek, Arizona
    pipe

    You can offset it, but do it as close to the trap as possible.
Similar Threads: Washing Machine
Forum Title Date
Plumbing Forum, Professional & DIY Advice, Tips & Washing machine not vented, Jun 24, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Standpipe drain for washing machine and iron curtain/H2O softener Jun 11, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Should I use aftermarket hoses on my washing machine? May 17, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Washing machine P trap & vent May 11, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Proper Washing Machine Drain and Vent Question Apr 30, 2014

Share This Page