Vent pipe in the slab

Discussion in 'Remodel Forum & Blog' started by damadake, Nov 2, 2006.

  1. damadake

    damadake New Member

    Messages:
    16
    I have a master bath with dead space behind the existing wall (used to be an old closet). The current bath is ~6'x7' but could be 12'x7' when the dead space is utilized.

    The bath has only a shower and the vent pipe runs up the back wall. There is sufficient room to install a tub in place of the shower, but the vent pipe either has to be moved or re-routed.

    Would it be best to raise the height of the tub and re-route the vent, or have a pro physically move the vent in the slab.

    Does anyone have experience with this? Any pointers would be appreciated.

    Thanks very much
Similar Threads: Vent pipe
Forum Title Date
Remodel Forum & Blog how to insert a charcole filter on vent pipe Apr 29, 2014
Remodel Forum & Blog vent pipe with off set design - permitted? Jan 15, 2008
Remodel Forum & Blog Re-routing Vent Pipe Nov 19, 2006
Remodel Forum & Blog iron pipe wet vent okay? Oct 2, 2005
Remodel Forum & Blog Vent pipe length Aug 7, 2005

Share This Page