tub/shower diverter problem

Users who are viewing this thread

nkopp

New Member
Messages
2
Reaction score
0
Points
0
I was replacing the washers on my tub valves today and after putting them back together, the valve that diverts the flow to the shower head doesn't seem to be working correctly. (I have three knobs all in a row.... hot, shower/tub, and cold). It leaked like this before I replaced the washers, but now it seems to be a little worse.

When the valve is in the "tub" position, it fills normally, but when it is in the "shower" position, water comes out of both the faucet and the shower head.

Any tips? Does the valve need to be replaced? Thanks for the help.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks