danski0224
New Member
Small project turning ugly. Odd size tub shoe, fine thread.
Knowing the manufacturer may help.
Anyone know the logo? Chicago IL area, house built ~1965.
The tub shoe hole, measured with a snap gauge and a digital caliper is 1.672".
Fine thread, 16 TPI (counted, have to find the thread gauge). Thread matches Central Brass part number 58-7059, however that one has an OD of 1.7970" (thread root is 1.7690"- that's comparable to what my shoe measurement is).
In a catalog, I saw a Watco part number 58-71397, listed as 1-5/8", but they did not have one in stock.
Any assistance would be appreciated.
Thank you.
Knowing the manufacturer may help.
Anyone know the logo? Chicago IL area, house built ~1965.
The tub shoe hole, measured with a snap gauge and a digital caliper is 1.672".
Fine thread, 16 TPI (counted, have to find the thread gauge). Thread matches Central Brass part number 58-7059, however that one has an OD of 1.7970" (thread root is 1.7690"- that's comparable to what my shoe measurement is).
In a catalog, I saw a Watco part number 58-71397, listed as 1-5/8", but they did not have one in stock.
Any assistance would be appreciated.
Thank you.
Last edited by a moderator: