tt prestige solo 250

Users who are viewing this thread

mdh

New Member
Messages
1
Reaction score
0
Points
1
Location
Bangor, Pennsylvania
has anyone had trouble with ignitors on these mod con,,,,, we have tried several and when unit has hard starts or lock outs and you check the ignitor it is almost 1/4" gap not 1/8 and bent no longer in alignment with each other, we have 2 units slave/master set up and it appears we have to baby sit the boilers when the cold hits,,, we did have some issues with "flame sensor error and tt sent us new combustion insulators which have material removed around ignitor area to prevent shorts but when we checked ignitor it was out of shape and gap to wide and it was only inuse the last month of winter
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks