trouble shooting low voltage control operates high volt can lights

Discussion in 'Electrical Forum discussion & Blog' started by cwhyu2, Jul 13, 2011.

  1. cwhyu2

    cwhyu2 Consultant

    Messages:
    1,331
    Location:
    Cincinnati OH
    Have not looked at this will be going there in 1 hour.
    Have 8 cans in a church 1 works the rest do not.
    Will update later.
    I have access to the cans above the sanctuary.
    Do not know where the control panel is yet.
    Get your minds rolling I may need your help!
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,249
    Location:
    Cave Creek, Arizona
    Obvious things are either a loose wire or SEVEN burned out bulbs.
  3. cwhyu2

    cwhyu2 Consultant

    Messages:
    1,331
    Location:
    Cincinnati OH
    Two circuts 16 lights not working, by passed the low volt switches got to go to attic
    above sanctuary 60ft with no catwalk 140 plus degrees up there today.
    Will go in morning.I know pretty much where problem is but I have to go from one end to the other to get to first box. I have worked on this church many times and it is old with new I am working where old meets new.Not fun!
  4. cwhyu2

    cwhyu2 Consultant

    Messages:
    1,331
    Location:
    Cincinnati OH
    Problem solved bad connection in first box how it lasted as long as it did I don`t know.
Similar Threads: trouble shooting
Forum Title Date
Electrical Forum discussion & Blog Advice for troubleshooting a bad circuit Oct 11, 2009
Electrical Forum discussion & Blog Troubleshooting two 3-way switch setups May 7, 2009
Electrical Forum discussion & Blog GFCI Troubleshooting Help Needed Apr 23, 2009
Electrical Forum discussion & Blog Troubleshooting Ceiling Fan Jul 7, 2007
Electrical Forum discussion & Blog Troubleshoot 20amp GFI branch Circuit Monday at 11:34 AM

Share This Page