Triangle Tube Challenger E5 error

Users who are viewing this thread

hdmod

New Member
Messages
2
Reaction score
0
Points
1
Location
Wisconsin
Last 3 weeks all of sudden E5 showing up on irregular basis.
Using boiler section for hydronic floor heat.
Unit struggles to get to set boiler temp set at 150 degrees.
Using infrared gun and analog probe temp gauge says I am putting out 125 degree water 24 inches below boiler outlet.?
Now noticing that DHW is struggling to put out 125 degree water when running large head delta shower..........never an issue in the past.

NEED HEAT AND HOT WATER............service tech out last week......cleaned ignitor and scratched head alot..............
 

hdmod

New Member
Messages
2
Reaction score
0
Points
1
Location
Wisconsin
Last 3 weeks all of sudden E5 showing up on irregular basis.
Using boiler section for hydronic floor heat.
Unit struggles to get to set boiler temp set at 150 degrees.
Using infrared gun and analog probe temp gauge says I am putting out 125 degree water 24 inches below boiler outlet.?
Now noticing that DHW is struggling to put out 125 degree water when running large head delta shower..........never an issue in the past.

NEED HEAT AND HOT WATER............service tech out last week......cleaned ignitor and scratched head alot..............


New ignitor and cable installed last week...........now code has changed to E 4 this past weekend..........this is going to get FUN!!!!!!!!!!!!!!
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks