In our reno we have added marble to the wall resulting in loss of about 3/4 inches to install our new Toto Ultramax MS854114S (on 12", now 10.5"). I anticipated this and at least asked the tilesetter to leave an extra inch of plywood bare in front of the existing flange.
Any suggestions on how best to deal with this? We have a joist below but it looks like with a bit of trimming I could install an offset flange. Thanks for any help you can provide.
By the way, have put same toilets into two other bathrooms after reviewing this forum and they are truly phenomenal.
Any suggestions on how best to deal with this? We have a joist below but it looks like with a bit of trimming I could install an offset flange. Thanks for any help you can provide.
By the way, have put same toilets into two other bathrooms after reviewing this forum and they are truly phenomenal.