TOTO Toilet Problem

Discussion in 'Toilet Forum discussions' started by fled57, Oct 29, 2007.

  1. fled57

    fled57 New Member

    Joined:
    Oct 29, 2007
    Just finished remodeling both first floor bathrooms with TOTO Drake elongated ADA toilets installed. Toilets are installed back to back using existing double sanitary tee. When toilet is flushed, water in the bowl of the other toilet is partially siphoned out and preceded by a large air bubble. Bowl can be refilled by an additional flush. My plumber is dumbfounded and has no fix. Vent pipe is clear. Septic tank recently cleaned. Never had this happen before with my old 1972 toilets.

    I spoke to TOTO tech service rep who recommended replacing the double tee with a double wye fitting for this G-Max toilet. Will this solve the problem?

    Need some advice on how to fix this unacceptable installation.
     
Similar Threads: TOTO Toilet
Forum Title Date
Toilet Forum discussions Toilet with strongest flushing capability (Toto) Today at 6:04 AM
Toilet Forum discussions TOTO toilet internals 'popping up' Wednesday at 5:42 AM
Toilet Forum discussions How to clean a Toto "Ultra Max with Sana Gloss" toilet? May 14, 2015
Toilet Forum discussions Other concealed skirt toilets and using the Toto unifit on them May 10, 2015
Toilet Forum discussions TOTO Toilet replacement - first timer :) - need help May 7, 2015

Share This Page