Toto Nexus sticky flush

Discussion in 'Toilet Forum discussions' started by David Sayed, Jul 21, 2013.

  1. David Sayed

    David Sayed New Member

    Messages:
    2
    Location:
    Washington
    I have a recently installed Toto Nexus. The flush handle on the Nexus points straight down so that it must be pulled towards the operator to actuate. The flush now sticks at the 90-degree position but can be pushed back. I feel resistance while pushing it back. There is the usual nylon threaded assembly in the tank. Is this flush handle behavior something that others have experienced, and if so how is it fixed?

    Thanks!
  2. Terry

    Terry Administrator Staff Member

    Messages:
    15,298
    Location:
    Bothell, Washington
    I would check to make sure nothing is "hanging up" in the tank.

    Then you can use some Silicone spray on the handle pivot.
  3. David Sayed

    David Sayed New Member

    Messages:
    2
    Location:
    Washington
    Thanks Terry. I used some silicone paste around the metal rod where it goes into the nylon assembly and it worked a treat!
Similar Threads: Toto Nexus
Forum Title Date
Toilet Forum discussions Maris vs Eco Nexus & Toto tubs Mar 26, 2014
Toilet Forum discussions Toto Eco Nexus.. thoughts? May 24, 2013
Toilet Forum discussions Toto EcoNexus / Maris / 1.0 gpf Drake 2 May 12, 2013
Toilet Forum discussions Toto Nexus trickling noise Sep 13, 2011
Toilet Forum discussions Toto Nexus Jun 23, 2010

Share This Page