toto flush lever

Discussion in 'Toilet Forum discussions' started by mjrva, Jan 20, 2005.

  1. mjrva

    mjrva New Member

    Messages:
    2
    I have to hold the lever down to complete the flush, just started happening, what broke?
  2. Plumber2000

    Plumber2000 Plumber

    Messages:
    196
    Location:
    Eugene, Oregon
    Either it's the flapper or the chain from flapper to handle has too much slack.

    Either take out the slack or replace the flapper.

    Lift tank lid to see if you can figure out what it is.
  3. Terry

    Terry Administrator Staff Member

    Messages:
    15,295
    Location:
    Bothell, Washington
    If you have the side mounted lever, the white plastic behind the chrome may have cracked. The outside lever should move the brass rod with little pressure.
    It can operate loosely however if that part cracks.
Similar Threads: toto flush
Forum Title Date
Toilet Forum discussions Older TOTO not flushing well-- require at least two flushes Oct 7, 2014
Toilet Forum discussions Broke off a flush valve hook - Toto Vespin Aug 20, 2014
Toilet Forum discussions Toto toilet spurts water 7-11 times from water pipe after flushing Aug 16, 2014
Toilet Forum discussions Toto flush lever getting stuck. Aug 12, 2014
Toilet Forum discussions Gurgling after flushing a Toto Aquia Wall-Hung? What's wrong? Jun 28, 2014

Share This Page