toto drake with 12" -> 10" rough in adapter?

Discussion in 'Toilet Forum discussions' started by lairdwd, Jul 25, 2006.

  1. lairdwd

    lairdwd New Member

    Messages:
    5
    Location:
    Connecticut
    I just realized that I have a 10" rough in, but ordered a 12" toto drake. Is there any way I can work with this? This is a new townhouse I bought, and just made a bad assumption it was a standard 12" rough in.

    Thanks.
  2. Terry

    Terry Administrator Staff Member

    Messages:
    15,010
    Location:
    Bothell, Washington
    The Drake will work at 11-0"

    But not 10".
  3. lairdwd

    lairdwd New Member

    Messages:
    5
    Location:
    Connecticut
    Chisled an alcove in the base tile and it just barely fit

    Thanks Terry. The story came to a great end!

    The rough was about 10 1/2, and eyballing it up, it was very close. I chisled away a very small alcove in the baseboard tile, and it got me to about 10 3/4It just barely fit. Thank goodness the drake has a tiny little tank that doesn't hang over the bowl too much.

    WOOHOO! Man, I was so psyched!!
Similar Threads: toto drake
Forum Title Date
Toilet Forum discussions Toto Clayton-type replacement lever for Drake II? Tuesday at 4:36 PM
Toilet Forum discussions Toto Drake fill valve makes strange noises Jul 24, 2014
Toilet Forum discussions 1.28 Toto Drake Back-to-Back Jul 14, 2014
Toilet Forum discussions My TOTO Drake II Arrived Trashed from Amazon - What a Disappointment! Jun 25, 2014
Toilet Forum discussions TOTO Drake II glazed trapway. CST454CEFG Jun 2, 2014

Share This Page