toilet rough-in height

Users who are viewing this thread

tstalkin

New Member
Messages
1
Reaction score
0
Points
0
tore open the floor at the toilet. (3x3 area) all flooring is removed ..1 1/8th "
ply is left ecept for the 3x3 hole around the toilet. rot has been removed. now i want to finish the floor with tile..it was lino. what do i need to do to get the ABS to the height i need so it will accept the flange from on top of the new tile and backer board...do i measure from the joist and add the backer board and tile to get there? then I cut the ABS and add enough to get me to the new height?

thanks in advance... young blood here..

Scott
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks