Softener Settings Advice

Discussion in 'Water Softener Forum, problems, installation and r' started by djbarber2, Apr 1, 2013.

  1. djbarber2

    djbarber2 New Member

    Messages:
    1
    Location:
    Massachusetts
    I am getting ready to set up my water softener. We have 2-1/2 baths, 2 adults and 2 kids on well water. Our water hardness is 31 gpg with trace amounts of iron (post greensand filter). I think our flow rate is around 3 GPM (filled up 3 gallon pale in bathtub). We have high chloride in our water due to highway salt contamination (chlorides check 436 MG/L), so I am forced to use potassium for our regen salt (currently working with state DOT to get remediation...likely be drilling new well in a year or so). I just purchased a Fleck 7000sxt 2 cu ft. softener, vortech tank with SST-60 resin to minimize potassium usage. Water softener will be installed after the iron filter. Hoping someone can recommend settings for this softener. Thanks!
  2. Gary Slusser

    Gary Slusser That's all folks!

    You should speak to the guys you bought it from.
Similar Threads: Softener Settings
Forum Title Date
Water Softener Forum, problems, installation and r Help with proper settings for Fleck7000 SXT Softener Nov 26, 2014
Water Softener Forum, problems, installation and r New 9100sxt 48k softener my settings Oct 18, 2014
Water Softener Forum, problems, installation and r Water Softener Settings & Documentation Sep 8, 2014
Water Softener Forum, problems, installation and r Water Softener settings help Sep 1, 2014
Water Softener Forum, problems, installation and r Water Softener Control Unit Settings and Documentation Aug 8, 2014

Share This Page