S-Connections

Discussion in 'Shower & bathtub Forum & Blog' started by Nettlewarbler, Aug 24, 2009.

  1. Nettlewarbler

    Nettlewarbler New Member

    Messages:
    14
    Location:
    United Kingdom
    mornin all , i bought a shower with a mixer valve . the fittings include 2 S-Connections . which look like two long offset threads . the 1/2 inch thread gets covered in PTFE Tape and is screwed into the pipework . the larger one is for fitting the valve .with my main pipework coming up the wall i think i will need some sort of elbow fitting . i would be very grateful if someone could advise me exactly what fittings i would need . it dos'nt say on the fitting instructions . maybe i will need a 1/2 inch x 15mm elbow . thank you .
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,230
    Location:
    Cave Creek, Arizona
    pipes

    We have no idea what you are describing. A picture would be helpful, or maybe necessary.

Share This Page