Rough in with Toto Toilet

Discussion in 'Toilet Forum discussions' started by Ezaction, Oct 2, 2011.

  1. Ezaction

    Ezaction New Member

    Messages:
    4
    Location:
    California
    Hi guys. Anyone have experience installing a Toto Eco Supreme? I have a 10 1/2 rough in and wondering if there is enough room with this toilet.
    The Eco Supreme has a 12" rough in. I know there is some room with the Toto's, but is this pushing it?

    Thanks,
    Ez
  2. Terry

    Terry Administrator Staff Member

    Messages:
    15,117
    Location:
    Bothell, Washington
    You will need at least 11-1/4" from the wall to the center of the drain for the Eco Supreme.

    The baseboard isn't counted.
  3. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,358
    Location:
    Yakima WA
    You might want to check out one of the Toto toilets that use the Unifit adapter. You'd definitely be able to fit one of them and have an excellent toilet as well. FYI, Toto is the only company that has this option. There are some 10" rough-in toilets available, but the selection is limited.
  4. Ezaction

    Ezaction New Member

    Messages:
    4
    Location:
    California
    Does this unifit adapter come with the Toto toilets that accept it, or is this a separate purchase?
  5. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,358
    Location:
    Yakima WA
    Unfortunately, the Unifit only fits 3 models. These toilets require an adapter and do not install like other toilets. These come standard with a 12" adapter. The 10" and 14" adapters cost an additional $50 and there is no credit for the 12". On the positive side, these are very well received toilets and will last for longer than most of us. Once installed, they appear like any other toilet. I should point out that I believe Toto makes a 10" Drake. I know they did at one time. Worth checking on. This would be quite a bit less expensive.
    Last edited by a moderator: Oct 2, 2011
  6. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Messages:
    22,129
    Location:
    New England
  7. JerryR

    JerryR Member

    Messages:
    250
    Location:
    Florida

    You could always install a 10" rough in Drake. That is what I did and i have been very happy with it.
    CST744SF.10. (1.6 gal )
    CST744EF.10. (1.28 gal)


    It comes in either 1.6 gal or 1.28 gal version.

    Jerry
    Last edited by a moderator: Oct 4, 2011
Similar Threads: Rough Toto
Forum Title Date
Toilet Forum discussions Fitting Toto to 13 7/16 rough-in to wall, but less with baseboard and shoe molding Jul 30, 2014
Toilet Forum discussions TOTO Soiree lowest flow toilet really works and unifit for 14" rough in is great Jun 28, 2014
Toilet Forum discussions Toto 10" Rough-in Toilet vs 12" with unifit May 6, 2014
Toilet Forum discussions Purchased Toto Drake II but discovered I only have 10" rough in Sep 9, 2013
Toilet Forum discussions Toto toilet bought through Home Depot Jul 31, 2013

Share This Page