Rough in for flush valve toilet

[Plumber69]

Is there a hieght for handicap flush valves. There going to be automatic. Or do I just go by the specs of the toilet. They are asking for 28 inches off floor and 4 3/4 center of flange

 

[Plumber01]

Go off the specs of the toilet. Typically you rough in 11.5" from top of toilet and 4.75" off center. Dont forget to consider finish floor height, although there is a bit of wiggle room when setting the flushometer.

 

[Sponsor]

 

[hj]

The handle also has to be on the side away from the side wall, even automatic, because you may decide to go manual at some time in the future.