Refinishing an Astracast composite corner sink

Users who are viewing this thread

98ZJUSMC

Member
Messages
30
Reaction score
0
Points
6
Location
Tunnel Hill, Ill
Hello all,

I have an Astracast white composite material double bowl corner sink that I installed in my kitchen remodel I did in 1998/99. Of course, over the years, it's accumulated a few chips and dings. Also, the years of food/coffee stains have taken a bit of a toll, so that I can no longer get it clean with just bleach, elbow grease and scouring. The bowl has a ingrained stain to it now. The material looks sandable. Has anyone refinished a similar material to this by sanding it. I am assuming it would be a grit reduction process by wet sanding the final time with 1000 grit to get a sheen to it.

Thanks for any advise and I hope I put this in the right area.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks