Sorry if this has come up but I couldn't find it. I have an R10000 and R11000 that am getting ready to install so I was researching depth and got stopped in my tracks. The wall is planned 1/2" drywall, floated, and tiled... which comes up a minimum 1 9/16" thick wall(prefer more float but) anyhow, by looking at this valve and diverter, maximum wall thickness is about 1 1/4". Am I missing something? TIA.
R10000 Depth
- Thread starter mlrs327
- Start date
Users who are viewing this thread
Breplum
Licensed plumbing contractor
Look for extension kits RP75136 for the main valve. Always buy model with stops.
Sponsor
Paid Advertisement
Jeff H Young
In the Trades
should be able to set valve to proper depth off set copper lines back deeper in wall if nessesary
Similar threads
