Questions about driving a new sandpoint well

Users who are viewing this thread

shorrock

New Member
Messages
4
Reaction score
0
Points
0
Hi everyone, first time post.

I have an existing well that no longer is providing the gpm that I need. I am planning on setting a new well, and have two questions..

One: Could I pull the existing sandpoint and place a new one there?

Two: If I should not replace the existing point, what is the distance I should use from the existing one to set a new well at?

Thanks,

Tom
 

Speedbump

Active Member
Messages
4,511
Reaction score
12
Points
38
Location
Riverview, Fl.
One: Could I pull the existing sandpoint and place a new one there?

Two: If I should not replace the existing point, what is the distance I should use from the existing one to set a new well at?

1) Yes you can. Or you can use Nu-Well tablets to clean the point.

2) Three feet or more, to get away from the build up of mineral that will be around the old point.

bob...
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks