PVC waste vent stack into old drain basement, proper way to seal it?

[iananderson82]

Hi all I want to seat the waste stack into the floor, some say concrete some said glue or epoxy. ....but what is the best way approved by inspectors of course? Here's a photo of what I'm dealing with if it helps.

 

[hj]

Yo are talking to a plumber, so I would use a No-Hub to PVC transition with a lead/oakum joint and a No-Hub type coupling to the PVC.

 

[Sponsor]

 

[iananderson82]

Lead and oakum..ok sounds legit that's what I cleaned out of there prior. Ok Thanks