Pullout tub shower diverter

Discussion in 'Shower & Bathtub Forum & Blog' started by SadlerConstruction, Aug 28, 2013.

  1. SadlerConstruction

    SadlerConstruction New Member

    Messages:
    1
    Location:
    California
    20130828_212902.jpg 20130828_212958.jpg 20130828_212652.jpg 20130828_213531.jpg 20130828_212838.jpg Hey everyone, this forum saved my Butt tonight. We have one shower and the valve cartridge broke and have no idea who makes the valve... Long story short after reading one of the responses to a similar problem I was able to find the cartridge replacement mfg but they don't make the actual valve body and trim. The Pullout diverted isn't broken but it is in bad shape and could go any day. My question is... Can anyone ID this diverted valve?
    Last edited: Aug 28, 2013
  2. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Messages:
    22,313
    Location:
    New England
    You might get it to work okay for awhile if you clean it up and install new O-rings...looks like at least one of them has a nick or two in it. Put some silicon plumbers grease on things and it should move easier, too.
Similar Threads: Pullout shower
Forum Title Date
Shower & Bathtub Forum & Blog Your Beach House Shower: Best way of preventing sand build up in drain Yesterday at 6:29 AM
Shower & Bathtub Forum & Blog Two shower heads Wednesday at 3:00 PM
Shower & Bathtub Forum & Blog Can't find this Delta 1700 shower valve Dec 13, 2014
Shower & Bathtub Forum & Blog Delay with hot water supply in shower Dec 9, 2014
Shower & Bathtub Forum & Blog Shakoolie: The Best Shower Beer Holder Dec 7, 2014

Share This Page