Power Pipe Installed + ABS drain pipe question

Users who are viewing this thread

d1yguy

New Member
Messages
3
Reaction score
0
Points
0
Location
New Brunswick
I posted about a month ago concerning a power pipe installation. Got some good advice (Thanks Terry!), and just completed the install last night. Here are some before and after pics.

I have a problem, though: When I was re-routing the black ABS drain pipe (from the shower), I had quite a wrestling match with the pipe trying to get the last pieces into place. The result is that my coupling is currently acting as an angle fitting. I am posting that below and am wondering if anyone can give me advice on how to resolve this problem. I want a good, reliable seal on that drain, and am happy to cut out part of the 1.5" ABS drain and re-do, but need some guidance on how I can get a better result on this portion of the install. Thanks for any help.

Before pic:

DSCN8450.jpg
DSCN8465.jpg
DSCN8467.jpg
DSCN8468.jpg
DSCN8464.jpg


After pics:
Show Drain Askew:
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks