Please help in identifying these old Delta fixtures

Discussion in 'Shower & Bathtub Forum & Blog' started by freerj, Aug 25, 2009.

  1. freerj

    freerj New Member

    Aug 25, 2009

    I'm repairing a set of 6 shower control valves in a locker room shower. They're all old Delta stuff. I've successfully replaced the springs and valve seals, but I'm short some handles and cover plates.

    Pictures of the handle/trim plate are here:

    Pictures of the valve stem and assembly are here:

    1. Any ideas where I can get replacement handles? (could be different style, but shaft bore needs to be the same, etc)

    2. Any ideas where I can get replacement trim plates? (could be different style, but bolt pattern needs to line up, etc.

    3. Any idea what the thread pitch is to hold the handles on? (need to replace a bunch of the screws that hold the handles on)

    Have struck out at Home Depot... Suggested online source?

  2. hj

    hj Moderator & Master Plumber Staff Member

    Aug 31, 2004
    Cave Creek, Arizona

    Usually any place that has Delta parts would have what you need. I was surprised that these are not pressure balanced valves.
  3. Sponsor

    Sponsor Paid Advertisement

Similar Threads: Please help
Forum Title Date
Shower & Bathtub Forum & Blog Diverter leaking from inside tube. please help identify/locate part Sep 12, 2015
Shower & Bathtub Forum & Blog Shower leaking! Please help! Aug 23, 2015
Shower & Bathtub Forum & Blog Help ID'ing Tub Fixture please Aug 16, 2015
Shower & Bathtub Forum & Blog Can't seem to find a prefab shower kit to fit my homes alcove. Please help! Jun 10, 2015
Shower & Bathtub Forum & Blog Can you please id&locate Ceramic shower cartridge (PHOTOS) to help save many $. Jun 6, 2015

Share This Page