Peerless Pinnacle Boiler Problem - Help!

Users who are viewing this thread

nova1966

New Member
Messages
1
Reaction score
0
Points
0
Location
Chicago
I currently have a Peerless Pinnacle #PI-80REV1 boiler. After the boiler heats up to 104+ degrees, it shuts off and I receive and error code of F09. I have replaced the ignitor electrode and flame sensor as well as using the troubleshooting guide to check for additional problems. I can let the unit set for a day and push the reset button on the display module and the unit will run. When the temp returns to the 104+ degree, it will turn off.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks