No pressure in line on one Zone

Users who are viewing this thread

Illingworth56

New Member
Messages
1
Reaction score
0
Points
1
Location
Utah
Hi a sprinkler newbie here

Not getting any pressure to sprinkler heads in one line

Here is what I have tried so far:

Verified water comming to valve and has pressure
Replaced diaphram
Replaced solenoid
Replaced with working valve
Capped all sprinkler heads bar one
Flushed line from sprinkler head with hose
 

WorthFlorida

Clinical Trail on a Cancer Drug Started 1/31/24. ☹
Messages
5,715
Solutions
1
Reaction score
980
Points
113
Location
Orlando, Florida
If you're using pop up spray heads, do they pop up at all? Yes, remove the spray heads and clean out the little screens and the spray heads themselves. If No, then you're not getting 24 volts to the solenoid. Most valve bodies you can turn the solenoid 1/4-1/2 turn and it will allow water to flow without power.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks