86sevenfivethreeohnine
New Member
Hi everyone, first post but have been reading for a bit. I am looking to replace my current Culligan rental water softener and purchase a proper system for treating my water. The current Culligan is doing well with some iron and egg smell from time to time. No slime in the toliet tanks.
Currently on a well 150 feet deep with a 1.5hp pump at about 100'. Internal pipe in and out of softener is 1". Written on my amtrol wx302 is "water level: 50 at 50GPM"
Primary goals would be to have soft water and remove as much iron as possible. Have 4 people in the home, 2 adults and 2 kids as well as the usual appliances (washer, dishwasher, etc). Would lean toward efficiency and longevity of the system/resin.
Local water guy recommends a 64k grain system with a Clack valve and 10% cross link resin.
Had the kit-90 completed by KAR. File attached.
Currently on a well 150 feet deep with a 1.5hp pump at about 100'. Internal pipe in and out of softener is 1". Written on my amtrol wx302 is "water level: 50 at 50GPM"
Primary goals would be to have soft water and remove as much iron as possible. Have 4 people in the home, 2 adults and 2 kids as well as the usual appliances (washer, dishwasher, etc). Would lean toward efficiency and longevity of the system/resin.
Local water guy recommends a 64k grain system with a Clack valve and 10% cross link resin.
Had the kit-90 completed by KAR. File attached.