skytower31
New Member
- Messages
- 4
- Reaction score
- 0
- Points
- 0
Just installed a new hot water heater. Hot water pressure is fine everywhere in the house except at the master shower which is the closest fixture to the water heater. We get a small trickle at the shower. We have pretty hard water / calcium deposit in our area and I cleaned alot of the screens at the other faucets, etc after the water heater swap. The shower/tub combo is a Moen so I just replaced the cartridge thinking it was clogged. Hot pressure remained the same.
Could something be blocking the line up stream? How can I clean that out?
I even tried removing the new cartridge and slowly turned the main water valve back on to try and flush anything out...no help.
Thoughts?
Thanks!
Could something be blocking the line up stream? How can I clean that out?
I even tried removing the new cartridge and slowly turned the main water valve back on to try and flush anything out...no help.
Thoughts?
Thanks!