sqwirmy
New Member
I am Just trying to put in a bathroom down in my new home basement, the room was roughed in for toilet/sink and shower drains, and has a vent tie in to the main system. The toilet drain is sticking up about 2 feet above the floor, How short do I cut the drain before I put the closet flange on? I think the Flange should be just above the finished floor? Also there are some closet flanges with a bevelled edge and some with a straight 90 deg ( on the bottom side) which one to use?
Any help would be appriciated, thanks.
Any help would be appriciated, thanks.