cousinricky
New Member
I don't know what I did but... this shower valve was flowing ok but not tempering. It was either cold or hot, no in-between.
I removed the cartridge and there were several pieces of sediment, some larger than grains of sand. I cleaned it out, lubricated it, and re-installed it. There was no flow. No hot, no cold. I took it out and flipped it over to no avail.
So I bought a new cartridge. Same problem. No flow at all,
Any ideas?
I removed the cartridge and there were several pieces of sediment, some larger than grains of sand. I cleaned it out, lubricated it, and re-installed it. There was no flow. No hot, no cold. I took it out and flipped it over to no avail.
So I bought a new cartridge. Same problem. No flow at all,
Any ideas?