Looking for a Trap Adapter

Users who are viewing this thread

Jim Mcku

New Member
Messages
5
Reaction score
0
Points
1
Location
West Palm Beach, FL
Is there a Trap Adapter (for bathroom sink) available, PVC, 1.25" outside thread and (the hard one) 1.5" inside thread.
I'm tight on space and want to avoid cuts.

Thanks in advance.
 

Reach4

Well-Known Member
Messages
38,749
Reaction score
4,400
Points
113
Location
IL
Look at Brasscraft 192A , 192B, or 192C
88e9b970-9960-4650-8acf-b4cb470311f6_145.jpg

OK, it is not PVC, but I would think it could connect to PVC tubing.
http://www.brasscraft.com/PDF/0302_Brass_Fittings_Catalog.pdf

Would that match what you were looking for if it were PVC and cheaper?
 
Last edited:

Asktom

Member
Messages
745
Reaction score
32
Points
18
Location
Victor, MT
Is there a Trap Adapter (for bathroom sink) available, PVC, 1.25" outside thread and (the hard one) 1.5" inside thread.
I'm tight on space and want to avoid cuts.

Thanks in advance.

Can't you just use a 1 1/2 slip joint nut and a 1 1/2 x 1 1/4 reducing slip joint washer?
 

Jim Mcku

New Member
Messages
5
Reaction score
0
Points
1
Location
West Palm Beach, FL
asktom,

I would have to cut the existing 1.5" pipe (outside thread) in the wall and I'm trying to avoid that.
Thanks for your reply.
 

Jim Mcku

New Member
Messages
5
Reaction score
0
Points
1
Location
West Palm Beach, FL
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks