Korky Toilet fill valve

Discussion in 'Toilet Forum discussions' started by Leeman, Sep 17, 2009.

  1. Leeman

    Leeman New Member

    Oct 6, 2008
    I am installing a new Korky toliet fill valve. I have followed directions good I think. When it's flushed the water level shuts off nice. but then you hear small noise a little gurgle & look back in & water has made to way to top of overflow valve. I have it set down & turned to left in locked position. ??
  2. Jay Mpls

    Jay Mpls Master plumber

    Sep 29, 2008
    Master Plumber /Sewer rat
    I would double check your 'locked posistion'.
  3. Sponsor

    Sponsor Paid Advertisement

  4. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Sep 2, 2004
    Retired Systems engineer for defense industry.
    New England
    During the repair, you may have dislodged some crud and it is caught in the sealing gasket. Take the cap off and check. The instructions came with it and are at their site. Should take all of a minute or so once you figure it out.
Similar Threads: Korky Toilet
Forum Title Date
Toilet Forum discussions Korky MaxPerformance Toilet Plunger Aug 2, 2014
Toilet Forum discussions Simple installation of toilet fill valve, either Korky or fluidmaster Jul 23, 2013
Toilet Forum discussions Chlorine Safe Korky Toilet Flapper Mar 29, 2013
Toilet Forum discussions Korky WaterWi$e not compatible with some models of American Standard toilets. Apr 22, 2010
Toilet Forum discussions Korky 528 rubber pad on float arm Sep 26, 2015

Share This Page