Kohler 304KS-NA

Users who are viewing this thread

CoryC

New Member
Messages
2
Reaction score
0
Points
1
Location
New York
I am installing a Kohler 304KS-NA shower body using PEX in a 2x4 wall.Can some one tell me how far back to put the 2x4 supports for the shower body,given the fact that a 1/2 inch of wonder board and a 1/2 inch of tile and adhesive will be on the front of the wall. Thanks for the help
 

Terry

The Plumbing Wizard
Staff member
Messages
29,946
Reaction score
3,460
Points
113
Location
Bothell, Washington
Website
terrylove.com
k-304-r01.jpg


Something like this.
 

hj

Master Plumber
Messages
33,599
Reaction score
1,037
Points
113
Location
Cave Creek, Arizona
Website
www.terrylove.com
You have the installation sheet that came with the valve, and you know how "thick" the wall will be. Put those two numbers together and place the backing at THAT point. If WE tell you where to put it and you do not like how it looks, you will write back and say, ,"You dummies, I followed your instructions and the valve is too far forward, (or backward), and I do not like how the handle looks".
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks