Kohler 1-piece toilet flush valve seal replacement

Discussion in 'Toilet Forum discussions' started by Greengo, Dec 28, 2009.

  1. Greengo

    Greengo New Member

    Messages:
    1
    Location:
    Cheney, Washington
    Kohler Rosario k-3434 one-piece toilet
    Flush valve seal replacement

    What are, if any, tricks are there to placing a new flush valve seal? There is no hardware. It is a compression seal held in place by three tabs on the bottom of the flush valve. These 3 tabs fit under the porcelain.

    Pressing down to fit the tabs under the porcelain with aligning the tabs is just about impossible. Hints, tricks, or encouragement will be appreciated.

    Thanks
Similar Threads: Kohler 1-piece
Forum Title Date
Toilet Forum discussions Kohler 1-piece toilet - water fill valve replacement Jun 18, 2006
Toilet Forum discussions Wall hung vs. water spot & skidmarks - TOTO, Eago, Kohler Jul 1, 2014
Toilet Forum discussions Kohler Touchless Flushing Retrofit K-1954 Jun 2, 2014
Toilet Forum discussions Kohler cimarron flush valve leak May 13, 2014
Toilet Forum discussions Kohler Kelston Comfort Height 1.28 gpf feedback??? Apr 16, 2014

Share This Page