CCFOAM
New Member
- Messages
- 6
- Reaction score
- 0
- Points
- 1
Just got home from working on my model 60 Kinetico. The unit sat for about 10 years so dis assembled both tanks, removed the media. Cleaned everything in CLR and re-assembled. When I tried to manually rotate the disc to do a regen, I couldn't get it to turn easily. It feels like the nub is worn off. The rotating part just slips over the disc nub. I removed the screws and the disk turns freely by hand. Anyone had this problem before?
Also still need a maintenance manual for the unit.
Thanks in advance.
Chuck
Also still need a maintenance manual for the unit.
Thanks in advance.
Chuck