Kinetico 2100s Water Softner - HELP!!!

Discussion in 'Water Softener Forum, problems, installation and r' started by windybird, Apr 27, 2009.

  1. windybird

    windybird New Member

    Messages:
    1
    Just moved into a house with a Kinetico 2100s water softener...and it has been a nightmare. Don't know how the thing works...so bare with me. It was on by-pass, we switched it to "service" and the salt tank filled with water and overflowed onto the floor causing a small flood. There are two tubes leading from the tall tank into the salt tank, a small skinny black one and a large orange tube from where water is filling up the salt tank. I am thinking the large orange tube should not be in the salt tank but is a drain tube?

    Attached Files:

    Last edited: Apr 27, 2009
Similar Threads: Kinetico 2100s
Forum Title Date
Water Softener Forum, problems, installation and r Kinetico 60 Troubleshooting Yesterday at 9:44 PM
Water Softener Forum, problems, installation and r KINETICO Model 60 PAWL LAYOUT Monday at 11:14 AM
Water Softener Forum, problems, installation and r Kinetico Model 60 Toothed Disk Operation Friday at 1:28 PM
Water Softener Forum, problems, installation and r Kinetico Model 60 problem with manually turing disc to regen Sep 11, 2014
Water Softener Forum, problems, installation and r SEQUENCE OF OPERATION for KINETICO MODEL 60? Sep 10, 2014

Share This Page