Kemore elite washer adivse

Discussion in 'Electrical Forum discussion & Blog' started by baffled, Oct 26, 2007.

  1. baffled

    baffled New Member

    Messages:
    1
    My washer has the electronic control panel at the top, its become intermittent, had sears come out, he ran his finger down the panel like going over piano keys and the lites came on and it worked.

    seemed to me a snap dome inside was problem, but sears wants 300.00 to replace the complete panel.

    now isn't their something i can do, can an electrican help, this cannot be a big project, sears says get the new panel or new washer, washer is only 5 yrs old.
  2. 480sparky

    480sparky In the Trades

    Messages:
    149
    Electricians pretty much deal with the electric supply to the appliance. The Maytag Repairman works on the innards.

    ...........................................[​IMG]

    Maybe you can order the panel yourself and attempt to change it out. But I doubt you'd find a Sparky in the Yellow Pages that would be willing to help unless you already know one as a friend.
    Last edited: Oct 26, 2007
  3. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    The $300 is probably $200 + for the part, and a basic service call charge.

    Membrane controls are just very expensive parts.

    If you can post the complete model number of the DW, I can get you the part # of the part, and the approximate retail price. It is probably not a difficult repair.
  4. jwelectric

    jwelectric Electrical Contractor/Instructor

    Messages:
    2,540
    Location:
    North Carolina
    Yes I agree with the price.
  5. Nate R

    Nate R New Member

    Messages:
    472
    Location:
    Milwaukee, WI
  6. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    These guys are apparently now out of a job!!!>>http://www.businessweek.com/ap/financialnews/D8SGHD700.htm
Similar Threads: Kemore elite
Forum Title Date
Electrical Forum discussion & Blog direcTV Sattelite dish mount Apr 9, 2008

Share This Page