Jacuzzi Bathtub - Low Jet Pressure

Discussion in 'Shower & Bathtub Forum & Blog' started by rjler, Jan 7, 2011.

  1. rjler

    rjler New Member

    Messages:
    1
    Location:
    Denver, CO
    I have a Jacuzzi Bathtub. When you turn the jets on, there is water flow but it is not
    very strong anymore. This problem got gradually worst over several months. The air
    controls no longer seem to have much effect. The bathtub was installed by the builder
    without any access panels. So before I pull off the front carpeted plywood panel, I thought
    I'd ask if anyone had any thoughts on what might be occurring. I have cleaned the tub periodically
    with Cascade and cleaned the intake filter.

    THANKS for help !!!
  2. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Messages:
    22,319
    Location:
    New England
    I'd read the instructions from the manufacturer carefully to determine the proper cleaning chemicals and procedures. Try that, then see what happens. Misuse of cleaners can ruin the pump or pit the materials.
Similar Threads: Jacuzzi Bathtub
Forum Title Date
Shower & Bathtub Forum & Blog Control mounted on bathtub to operate Jacuzzi motor Nov 20, 2010
Shower & Bathtub Forum & Blog jacuzzi tub Nov 11, 2014
Shower & Bathtub Forum & Blog Adding a step to an outdoor pool jacuzzi Jul 26, 2014
Shower & Bathtub Forum & Blog Water Jet jacuzzi timer Feb 5, 2014
Shower & Bathtub Forum & Blog Jacuzzi Primo soaking tub vs. Sterling Ensemble? Mar 7, 2013

Share This Page