interchangeability of toilet tanks

Discussion in 'Toilet Forum discussions' started by Kendallroad, Dec 29, 2012.

  1. Kendallroad

    Kendallroad New Member

    Messages:
    14
    American standard does make replacements for their tank model no.4036 are other tanks available as replacements
  2. wptski

    wptski Retired Machine Repairman

    Messages:
    137
    Location:
    Warren, MI
    What toilet is that for? I have a Cadet 3 1.6gpf which came with their universal bowl which can also use their 1.25gpf tank. Then there's the rough in size, 10, 12 or 14". Each uses a different size tank. If you had a 12" rough in, if available, you could use a 10" tank to leave space behind it to the wall but less space on sides and higher also.
  3. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,534
    Location:
    Cave Creek, Arizona
    IF the distance between the two bolts is the same, and the flush valve opening is approximately the same distance from both the front and rear of the tank, then the tank will usually interchange. IF any of these dimensions is off, then the seat may not stay up, the tank may hit the wall, or it may not go down on to the toilet.
Similar Threads: interchangeability toilet
Forum Title Date
Toilet Forum discussions are US toilet makers asleep? Yesterday at 5:46 PM
Toilet Forum discussions Broken bolts in toilet flange in concrete slab Aug 18, 2014
Toilet Forum discussions Inax toilet seat removal Aug 18, 2014
Toilet Forum discussions Advice about an American Std one piece toilet Aug 17, 2014
Toilet Forum discussions Toto toilet spurts water 7-11 times from water pipe after flushing Aug 16, 2014

Share This Page