Installing Toto Ultramax question

Discussion in 'Toilet Forum discussions' started by nmlaz, Nov 11, 2011.

  1. nmlaz

    nmlaz New Member

    Joined:
    Oct 30, 2011
    Location:
    Portland, Oregon
    Terry or other,

    I bought one of the Toto toilets you recommended. I had a flushing problem (frequent clogs from previous toilet) and figured I needed to upgrade anyway. I took the old toilet off and found a transition from flange to soil pipe which now I know probably contributed to the flushing problems....brother. Anyway, I still think the new toilet will work fine without re-plumbing but thought I would ask. Does anybody think I need to re-plumb? Also, should I replace the flange or use the old one (about 15 years old)?

    Thanks for your help.

    Nick
     
  2. jadnashua

    jadnashua Retired Defense Industry Engineer xxx

    Joined:
    Sep 2, 2004
    Occupation:
    Retired Systems engineer for defense industry.
    Location:
    New England
    Normally, as long as the flange is intact, you can just install a new toilet on it. WIthout seeing what you are seeing, there's no way to tell if you need to do something else. Post a picture, and then you can get a better answer.
     
  3. Sponsor

    Sponsor Paid Advertisement

     
Similar Threads: Installing Toto
Forum Title Date
Toilet Forum discussions TOTO THU9090R adapter for installing a Washlet on an Aquia Oct 13, 2016
Toilet Forum discussions Installing Toto Carlyle II - water supply Aug 13, 2013
Toilet Forum discussions Installing a wall-hung Toto Aquia toilet Jun 18, 2013
Toilet Forum discussions [HELP] Installing TOTO Washlet on existing TOTO Aquia II toilet Mar 8, 2012
Toilet Forum discussions Installing second toto drake .. Question about the flange Sep 11, 2011

Share This Page