Installing SDR-21 - 600ft

Users who are viewing this thread

Nic3456

New Member
Messages
3
Reaction score
0
Points
1
Location
Colorado
Going to be install some 2 inch SDR-21 water pipe next week (about 600') and had a few questions.

- anyone have a preferred lube/grease they like to use?
- will the pipe have any flex/give? We need to shift the pipe about 30' over the last 200'
- do you put together the pipe on the surface and then roll in or just pull up the end and attach the new pipe? (I'm going to be about 42"+ deep)
-any other tips? (My builder will be connecting at house and water company will be connecting at meter)

I haven't been able to find any good YouTube videos - if anyone has any recommendations
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks