How to create a slope for the toilet drain line?

Users who are viewing this thread

soultraveler

New Member
Messages
22
Reaction score
0
Points
1
Location
British Columbia
How do you guys actually create a slope for the toilet drain line, when the toilet flange and the floor are horizontal and flat?

It seems hard to generate a slope when all the abs fitting come together tightly.

Thank you
 

soultraveler

New Member
Messages
22
Reaction score
0
Points
1
Location
British Columbia
plumbing2.jpg

Hi Terry
Thank you for reply

oh for example, in my case i would use a 60 degree abs elbow to connect with my flange and sewer line right?
 

NHmaster3015

Master Plumber
Messages
833
Reaction score
2
Points
0
Location
The granite state
There is a built in angle of acceptance for fittings. You only need 1/2 inch per foot. this is pretty basic stuff. Are you sure you want to tackle your project?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks