Help Identifying This Tub Spout?

Discussion in 'Shower & bathtub Forum & Blog' started by AllSystems, Dec 11, 2012.

  1. AllSystems

    AllSystems DIY Junior Member

    Messages:
    2
    Location:
    California
  2. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    generic screw on spout. if you can read a brand name on the valve trim, there is an outside chance they might still make it. You coild also unscrew and reuse the pull knob as well as the wall spacer. If they need to be replaced, check aftermarket.
  3. AllSystems

    AllSystems DIY Junior Member

    Messages:
    2
    Location:
    California
    Thanks Jimbo. No lettering on escutcheon or elsewhere. Will check aftermarket.

    Chuck
  4. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,484
    Location:
    Cave Creek, Arizona
    Taake the handle off and give us a picture of the stem it was on. It is probably either Moen or Pfister, and depending on why you need a new one they might furnish it. Finding a chrome/polished brass "generic" spout might be an insurmountable task.
Similar Threads: Help Identifying
Forum Title Date
Shower & bathtub Forum & Blog i need help identifying shower valve and/or locating a replacement cartridge Aug 7, 2014
Shower & bathtub Forum & Blog please help identifying shower valve. Aug 3, 2014
Shower & bathtub Forum & Blog Help in Identifying Diverter Valve Stem Jul 14, 2014
Shower & bathtub Forum & Blog Help Identifying a older Valley tub/shower faucet Jul 1, 2014
Shower & bathtub Forum & Blog help identifying shower valve. Delta Monitor 17 Mar 1, 2014

Share This Page