Height of rough-in for a lav drain.

Users who are viewing this thread

smilingkev

New Member
Messages
1
Reaction score
0
Points
0
Location
Colorado Springs
I set my rough in for a bathroom sink 20" above the sub-floor. Will this be too high for what a typical residential cabinet and lav will need? My commercial experience makes me think this will work, but measuring the drains of my friends and neighbors is making me think twice. Help please.
 

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,771
Reaction score
1,191
Points
113
Location
New England
Vanity counter height varies, as does the sink depth. No one location works ideally (or maybe, at all) for all sinks. Some people are using kitchen cabinet height vanities, some use the 32, and some still use the 29" or another height. Then, depending on whether it is an undermount or drop-in, or a moulded, one-piece...the height may need to be adjusted.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks